Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Model No: CA25T
Marka: Brando
Packaging: pudełka, kartony, skrzynki, palety
wydajność: 100000pcs per month
transport: Ocean,Land,Air
Place of Pochodzenia: Ningbo, Chiny
Wsparcie: 100000pcs per month
Certyfikat: CE.ISO
Porta: Ningbo,Shanghai,Tianjing
Rodzaj płatności: L/C,T/T,Paypal,Western Union
Incoterm: FOB,CFR,CIF,EXW,FCA,CPT,CIP
Pneumatyczny elektromagnetyczny zawór pulsacyjny CA25T
Use period
|
Failure phenomena
|
Possible Reason
|
Troubleshooting
|
During installation and commissioning
|
The valves cannot all be opened, but the leading part does act.
|
Check the gas dome pressure to see if it is too low.
|
Check the leakage
|
Some valves do not work, but the others are normal.
|
Check the valve coil connection and coil
|
Replace the accessories
|
|
The valves cannot all be closed. There is leakage. There is no way to establish a gas dome.
|
Y-valve. Some valves for the same gas dome are leaking, thus causing leakage for all the valves.
|
Check the leakage
|
|
Z-valve. The valve inlet and blowing muzzle are installed backwards.
|
Re-install
|
||
Some valves cannot be closed. There is leakage.
|
There is some dirt or debris on the membrane, ii is blocking the moving iron core.
|
Clean the membrane and check that the membrane is complete. Check the moving iron core and air lock.
|
|
A valve closing is slowly.
|
The membrane orifice is blocked.
|
Dredge the membrane orifice
|
|
During use period
|
Some valves are leaking. The membrane cannot close tightly and the valve is always open a
little.
|
There is some dirt or debris on the membrane, the leading part is damaged. Moving iron core is blocked.
|
Clean the membrane and check that the membrane piece is complete. Check the moving iron core and the air lock. Replace the accessories if necessary.
|
Coil is hot and burned out.
|
It has been turned on for too long.
|
Check the working condition of the control system.
|
|
Voltage exists but the valve does not operate.
|
Membrane is damaged and the orifice is blocked.
|
Replace the accessories in time.
|
|
Ambient temperature is below -20℃. The valve is leaking and cannot open.
|
Ambient temperature is too low and here is frost in the valve.
|
Pay attention to insulation and maintaining proper temperatures.
|
Przed przeprowadzeniem jakichkolwiek czynności konserwacyjnych w systemie należy upewnić się, że elementy są całkowicie odizolowane od ciśnienia i zasilania
materiały eksploatacyjne. Ciśnienie i moc nie powinny być ponownie stosowane, dopóki zawór nie zostanie całkowicie zmontowany. Kontrola membrany i pilota
powinny być przeprowadzane co roku.
ZALETY naszych produktów:
Korpus i pokrywa zaworu są odlewane kompaktowo i pokryte przezroczystą farbą w celu poprawy odporności na korozję.
Podkładka uszczelniająca na membranie wykonana jest z metalu i gumy, która jest sztywna i nie przecieka.
Elektromagnetyczne zasysanie głowicy, czułe i niezawodne działanie.
Jeden inny: ten sam model, specyfikacje wszystkich innych produktów, części mogą być uniwersalne, wymienne.
Stabilna i niezawodna wydajność, żywotność membrany osiąga ponad milion razy.
Daj nam zapytanie!
Kategorie o produkcie : Zawór impulsowy kolektor kurzu > Zawór odrzutowy pulsowy
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.